Built-In Safety Lock; Safety Feature; Electromagnetic Fields (Emf) - Philips HR3651 Manual Del Usuario

Blender
Warning
• Never reach into the
blender jar with your
fingers or an object while
the appliance is running.
Caution
• To prevent spillage, do
not put liquid more than
the maximum capacity
of the blender jar. When
you process hot liquid
or ingredients that tend
to foam, do not put
more than 1.5 liters in the
blender jar.
• Do not let the appliance
run for more than
3 minutes at a time. Let
the appliance cool down
to room temperature
before you continue
processing.
• Always make sure the
lid is properly closed/
assembled on the jar
and the measuring cup is
inserted properly in the
lid before you switch on
the appliance.
• Do not use glass jar right
after taking it out from
dishwasher or refrigerator.
Let it stay at room
temperature for at least
5 min before use.

Built-in safety lock

This feature ensures that you can
only switch on the appliance if the
blender jar, the mill or the tumbler is
assembled on the motor unit properly.
If the blender jar the tumbler is correctly
assembled, the built-in safety lock will
be unlocked.

Safety Feature

This blender is fitted with a safety
feature which safeguards against
excessive loads. In case of overloading,
the blender automatically activates
the protection and operation will stop
and the overloading symbol
up on the control panel. If this occurs,
set the rotary knob to OFF, unplug the
appliance and allow it to cool down for
15 minutes. Remove the ingredients and
clear up the blender jar before starting
operation.
Electromagnetic fields
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fields.
will light
EN 9