Electromagnetic Fields (Emf) - Philips HR3553/00 Manual Del Usuario

If the blade unit gets
•
stuck, unplug the
appliance before you
remove the ingredients
that block the blades.
Caution
Always make sure the lid
•
is properly assembled
on the chopper bowl
before you switch on the
appliance.
If food sticks to the wall
•
of the chopper bowl,
switch off the appliance
and unplug it. Then use
a spatula to remove the
food from the wall.
Never use the chopper
•
for more than 30 seconds
without interruption.
Always let the appliance
•
cool down to room
temperature after each
batch you process.
Metal chopper
Warning
Make sure the blade unit
•
is securely fastened to
the metal chopper before
you assemble the metal
chopper onto the motor
unit.
EN
10
Never use the metal
•
chopper to grind very
hard ingredients such as
nutmeg, Chinese rock
sugar and ice cubes.
Do not touch the cutting
•
edges of the metal
chopper blade unit when
you clean it. They are
very sharp and you could
easily cut your fingers on
them.
Caution
Never use the metal
•
chopper for more than
30 seconds without
interruption.
Always let the appliance
•
cool down to room
temperature after each
batch you process.
The metal chopper is not
•
suitable for chopping raw
meat. Use chopper (if
provided) instead.
Electromagnetic fields
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fields (EMF). If handled properly and
according to the instructions in this user
manual, the appliance is safe to use
based on scientific evidence available
today.