Messages - Sony DSX-A415BT Manual De Instrucciones

Messages

The following messages may appear or flash during
operation.
INVALID
 The selected operation could be invalid.
 [USB MODE] cannot be changed during iPod
playback.
READ: Now reading information.
 Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
(underscore): The character cannot be
displayed.
For USB device playback:
HUB NO SUPRT: USB hubs are not supported.
IPD STOP: iPod playback has finished.
 Operate your iPod/iPhone to start playback.
NOT SUPPORT - ANDROID MODE
 A USB device not supporting AOA (Android Open
Accessory) 2.0 is connected to the unit while [USB
MODE] is set to [ANDROID].
 Set [USB MODE] to [MSC/MTP] (page 23).
USB ERROR: The USB device cannot be played.
 Connect the USB device again.
USB NO DEV: A USB device is not connected or
recognized.
 Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC: There is no playable file.
 Connect a USB device containing playable files
(page 27).
USB NO SUPRT: The USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site on the back cover.
OVERLOAD: The USB device is overloaded.
 Disconnect the USB device, then press SRC to
select another source.
 The USB device has a fault, or an unsupported
device is connected.
For BLUETOOTH function:
BTA NO DEV: The BLUETOOTH device is not
connected or recognized.
 Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
ERROR: The selected operation could not be
performed.
 Wait for a while, then try again.
UNKNOWN: A name or phone number cannot be
displayed.
WITHHELD: The phone number is hidden by the
caller.
For Sony | Music Center operation:
APP ––––––––: A connection with the application is
not established.
 Make the "Sony | Music Center" connection again
(page 20).
APP DISCNCT: The application is disconnected.
 Make the "Sony | Music Center" connection
(page 20).
APP DISPLAY: A screen setting display of the
application is open.
 Exit the screen setting display of the application
to enable button operation.
APP LIST: The contents list of the USB is open.
 Exit the list of the application to enable button
operation.
APP MENU: A setting display of the application is
open.
 Exit the setting display of the application to
enable button operation.
33
GB