8. Gently squeeze your finger to
assist the flow of blood. This
34
helps you get a blood drop.
Touch the blood drop to the
front.edge of the yellow
window of the test strip. Do.
not.put.blood.on.top.of.the.
test.strip.
NOTE
After completing a blood glucose or control test, the meter turns itself off 5 seconds after the test strip is
removed.
WARNING
If.mg/dL.does.not.appear.with.the.test.result.contact.the.ACCU‑CHEK.Customer.Care.Service.
Center.at.1‑800‑858‑8072..Use.of.the.wrong.unit.of.measure.may.cause.misinterpretation.of.your.
actual.blood.glucose.level,.and.may.lead.to.incorrect.treatment.
9. When you see
flash, you
have enough blood in the test
strip.
10. The result appears on the
display. If you want to flag
your test result for a special
event, leave the test strip in
the meter. (See Chapter 3,
"Flagging Test Results.")
Otherwise, throw the used test
strip away.