Using the Unit
Listening to music
This unit supports the SCMS-T content protection method. You can
listen to music or audio content protected by this method when the
connected Bluetooth audio source device supports the SCMS-T content
protection.
Check the following before operating the unit.
The Bluetooth audio source device is turned on.
Pairing of this unit and the Bluetooth audio source device is complete.
The Bluetooth audio source device supports the transmitting music
function (profile: A2DP*).
* For detail on profiles, see page 18.
The DMPORT function is selected at the connected AV system.
1
Check to see if the indicator flashes slowly, indicating
connection is possible.
Note
If the indicator turns off, press the OPR button momentarily, or perform the
pairing procedure again.
Start the Bluetooth connection from the Bluetooth audio
source device.
To operate the Bluetooth audio source device, refer to the operating
instructions of the device.
Start music playback on the Bluetooth audio source
device.
Note
After connection is complete, the indicator becomes constantly on.
11
Continued
GB