Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Attaching the player to the
installation board
Slide the player on the board until stabilized.
When the player is installed behind
the seat
The player is installed upside down.
Follow the procedure below to turn the picture
on the screen upside down and switch the
audio channels to use the player.
1
Open the monitor of the player, rotate it
in 180 degrees, then close it with the
screen facing upward.
2
Turn on the player, then press
(REVERSE) on the monitor.
REVERSE
To cancel this, press (REVERSE) again.

Resetting the player

Before operating the player for the first time,
you must reset the player.
Press (RESET) with a pointed object, such as a
ballpoint pen. Pushing it with force by using a
needle may damage the player.
Notes
• When you press (RESET), some of the previous
settings may be lost. If this occurs, make the
settings again.
• It takes about 10 seconds for the player to reset
itself after pressing (RESET). Do not insert a disc
during this time. If you do, the player may not be
reset properly.
RESET
11

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido