CHARGING THE UNIT
This player is powered by a Lithium-Polymer battery. It features high ratio of energy to weight. And it has
no memory effect and thus it can be recharged at any time regardless that it is fully or partially
discharged. It takes about 6 hours to fully charge the battery. And the fully charged battery can be used
for up to two hours.
Connect the attached AC/DC adapter to the DC INPUT jack on the unit, and then plug the adapter into a
100V - 240V AC outlet.
Note: Make sure to switch off the unit before charging. The charging-indicator LED changing from red to
green indicates that the battery has been fully charged.
Usage and Maintenance of the Rechargeable Battery
1. The working temperature of the rechargeable battery ranges from 0 to 45 .
2. Always unplug the unit when it is not being used, unless it is being charged.
3. Heat is inevitably produced during the playback, when is normal. But do not use it for a long time.
4. Avoid colliding it with other objects and keep away from humidity and overheat.
CONNECTION TO TV
This unit can be connected to a TV so that you can enjoy the high
quality music, movies etc with a TV.
Use a AV cable to connect the AV OUT jack on the unit to the AV
IN jack of a TV.
Use a coaxial cable to connect the coaxial output of this unit to the
coaxial input (if available) of a power amplifier.
SYSTEM SETUP
Menu Operation
1. Press [SETUP] on the remote control or on the unit to show the setup menu.
2. Press [LEFT]/[RIGHT] to select an item. The submenu of the selected item will be shown below
instantly.
P-10