NOTE: This function only works with those discs encoded with PBC function such as VCD2.0, SVCD
etc.
VCD1.1, CD-DA and MP3 disc have no PBC menu.
4.2 AUDIO, SUBTITLE and DISC MENU
Select a preferred audio language, subtitle language and disc menu language in these items.
You can also change the audio language by pressing [AUDIO] and the subtitle language by pressing
[SUBTITLE] on the remote control.
NOTE: If the selected languages in these items are not available for the currently playing disc, the disc's
default settings work.
4.3 PARENTAL
This item allows the user to set a maximum rating of the movies that can be viewed. Movies rated higher
than the level set for the kid safe lock can not be viewed without inputting the correct keywords. What's
more, to key in the correct password is needed to reset the level. The default password is 0000.
NOTE: This function only works with those discs with parental function.
4.4 pass word
On/Off buttom
4.5DEFAULT
Restore the default settings except the settings in the PASSWORD setup page and the reset item.
5. PASSWORD SETUP PAGE
5.1 PASSWORD MODE
You can switch on/off the password function in this item.
NOTE: You must key in the correct password and press [ENTER] before you change the option in this
item. The default password is8888.
5.2 PASSWORD
You can reset the password in this item.
NOTE: The default password (8888) is always active even if the password has been reset.
After all the connections was made correctly. Switch on the unit. Now, it is ready to service.
PLAYBACK
Loading and Playing a Disc
A. After connecting power to the unit, set the power switch to the ON position.
B. Push [OPEN] to open the disc tray. Place a disc in it with the label side facing up.
C. Close the disc tray. The unit will load the disc and start playing.
P-13