Premier SX-5476TVD Manual De Instrucciones página 28

3. Press [UP]/[DOWN] to select an item in the submenu, then press [OK]/[ENTER]/[RIGHT] to enter.
Use [UP]/[DOWN] to select an option, then press [OK]/[ENTER] to confirm it or press [LEFT] to
cancel.
4. Then you can press [UP]/[DOWN] to continue to set other items in the submenu.
5. Press [LEFT] to go back to the superior menu of the current one.
6. Press [SETUP]
1. GENERAL SETUP PAGE
There are six items in the GENERAL SETUP PAGE. They are TV DISPLAY, ANGLE MARK, OSD
LANGUAGE, CAPTIONS, SCREEN SAVER AND LAST MEMORY.
1.1 TV DISPLAY
4:3 PANSCAN
If the unit is connected to a conventional TV set, the wide-screen image will be displayed on the screen
in its native aspect ratio with some part on the left and right cut off.
4:3 LEFTER BOX
If the unit is connected to a conventional TV set, the wide-screen image will be displayed on the screen
in its native aspect ratio with black borders on the top and the bottom side.
16:9 WIDE: Select this option if the unit is connected to a wide-screen TV set. The wide-screen image
will be displayed in full screen in its native aspect ratio while the 4:3 image will be stretched out
horizontally to fit in the screen.
1.2 ANGLE MARK
Set this item ON. When a disc encoded with multiple camera angles is playing, the angle mark will
display on the screen. Then you can view the video of different camera angles by pressing [ANGLE] on
the remote control.
Set this item OFF to disable this function.
NOTE: This function only works with those discs encoded with closed captions.
1.3 OSD (On-Screen Display) LANGUAGE
Set the On-screen display language in this item.
1.4 CAPTIONS
Set this item ON. When a disc encoded with closed captions, the closed captions will be shown on the
screen. Set this item OFF to hide it.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions.
NOTE: This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped etc, for
several minites, a screen saver will appear on the screen. You can press any key or button to wake it up.
OFF: Disable the screen saver function.
1.6 LAST MEMORY
ON: Each item you turn off the unit or stop the disc, it will memorize the last play time. Next time you turn
on the unit and play the same disc, the unit will play from that memorized point.
OFF: Disable the last memory function.
again or highlight and press [ENTER]/[OK] to exit the setup menu.
P-11