KPS CC640 Manual De Instrucciones página 6

INTRODUCTION
The cable tracker is designed to identify and trace wires or cables without dam-
aging the insulation. For telephone line, it can identify some state in the line,
and more conveniencie to install, debug, mantain telephone line. There are a
sender and a receiver included in the cable tracker.
FUNCTIONS
1) Judge continuity of the cables or wires.
2) Track the cables or wires, and diagnose the break point.
3) Receiver the tone signal on the cables or wires (telephone line)
4) Identify the state in the working telephone line (clear, ring, busy)
5) Send a single solid tone or a dual alternating tone to the object cables or wires.
OPERATING INSTRUCTIONS
Test continuity:
1) Use the sender (switch to "CONT"). Connect the test leads to the sub-
ject pair. Use "CONT" position. The bright red of "CONT" indication
indicates the continuity (line resistance not exceeding 10kΩ)
6
Cable tracker