1. Get started
■
Install the SIM card and the battery
Always switch the device off and disconnect the charger before removing the battery.
Remove the back cover (1) and the battery (2),
as shown.
The SIM card and its contacts can easily be damaged
by scratches or bending, so be careful when handling,
inserting, or removing the card.
Insert the SIM card with the gold-colored contact
area on the card facing downwards (3).
Replace the battery, as shown (4), and slide the back
cover into place (5).
■
Charge the battery
Charging the BL-6P battery with the AC-6 charger
takes approximately two hours while the phone is in
the standby mode.
• Connect the charger to a wall outlet.
• Open the cover on the top of the phone (1) and
connect the lead from the charger to the socket (2).
If the battery is completely discharged, it may take
several minutes before the charging indicator appears on
the display or before any calls can be made.
■
CA-101 data cable
The CA-101 data cable is used for data transfer and slow charging the battery while
connected to a PC or laptop.
12