Switch The Phone On And Off; Set The Time, Time Zone, And Date; Configuration Settings Service - Nokia 6500 Classic Manual Del Usuario

You must download Nokia PC Suite 6.83 to use with your phone. Updated versions can be
added after version 6.83. Go to www.nokia.com/support for more information.
1. Connect the lead from the CA-101 to the micro USB socket on the top of your phone.
2. Connect the CA-101 to your PC or laptop. Select USB mode: appears on the display
screen of your phone.
3. Select the mode you want.
The AC-6 charges the battery much faster than the CA-101. Charging with
the AC-6 is recommended when short charging times are needed.
■

Switch the phone on and off

To switch the phone on or off, press and hold the power key, as shown.
If the phone asks for a PIN or a UPIN code, enter the code (for example,
displayed as ****), and select OK.
When you switch on your phone for the first time, and the phone is in the
standby mode, you are asked to get the configuration settings from your
service provider (network service). Confirm or decline the query. See
Connect to support, p. 31, and "Configuration settings service," p. 13.
■

Set the time, time zone, and date

When you switch on your phone for the first time, and the phone is in the standby mode, you
are asked to set the time and date. Fill in the fields, and select Save.
To access Date and time later, select Menu > Settings > Date and time > Date & time
settings, Date and time format, or Auto-update of time (network service) to change the
time, time zone, and date settings.
■

Configuration settings service

To use some of the network services, such as mobile internet services, MMS, Nokia Xpress
audio messaging, or remote internet server synchronization, your phone needs the correct
configuration settings. For more information on availability, contact your service provider,
nearest authorized Nokia dealer, or visit the support area on the Nokia web site,
www.nokia.com/support.
When you have received the settings as a configuration message, and the settings are not
automatically saved and activated, Configuration settings received is displayed. Select Show >
Save. If required, enter the PIN code supplied by the service provider.
13