Fx2 Knob: Delay/Reverb; Troubleshooting - Vox SOUNDBOX mini Manual De Usuario

FX2 Knob: Delay/Reverb

A.DLY
This models an analog delay that uses a bucket brigade device (BBD).
The sound quality is low fidelity, but its warm sound is popular among
musicians.
Use the knob to adjust the mix amount of the delay sound.
Use the TAP button to set the delay time. The maximum delay time is
1.2 seconds.
ECHO
This models a popular analog tape echo.
Tape echo was originally created by using a playback head, and the
delay time was adjusted by modifying the motor speed.
The knob and button functionality are the same as the A.DLY model.
SPRING
This models a spring reverb inside a guitar amp.
Use the knob to adjust the mix amount of the reverb sound.
Use the TAP button to set the reverb time.
HALL
This models reverberations in a concert hall containing many echoes.
The knob and button functionality are the same as the SPRING model.

Troubleshooting

The power does not turn on even when the power button is pressed
and held down.
• Have you installed batteries? Are the batteries correctly oriented?
Or, is the AC adapter cord connected to the rear panel of the amp
correctly?
• Is the AC adapter plugged into an AC outlet?
• Is the AC outlet switched on and working?
• Is the AC adapter damaged?
There's no sound coming from the amp
• Is your musical instrument turned up?
• Make sure that the musical instrument is connected properly.
• Is the connected cable working?
• Is the top panel VOLUME knob turned up?
• Do you have headphones or anything else plugged into the amp's top
panel PHONES jack? If "yes," unplug them.
The amp doesn't seem very loud
• Is your musical instrument turned up?
• Is the top panel VOLUME knob turned down low?
• Are the batteries depleted?
There's no sound heard from the PHONES jack when you use it.
• Check that the top panel VOLUME knob isn't turned all the way down.
• Make sure sound is coming from the amp.
You'll need to unplug your headphones or the cable from the PHONES
jack to do this, since plugging something into this jack automatically
mutes the amp's speakers. If there's still no sound from the amp, go to
the "There's no sound coming from the amp" section. If you do hear
sound, check the headphones or cable you are hooking up to this jack.
9