Remote Control - Sony STR-ZA5000ES Manual De Instrucciones

Remote Control

Parts Functions
 MAIN  (power)
Turns the receiver on or sets it to standby
mode.
 ZONE2, ZONE3, MAIN
Selects the location to be controlled.
 PURE DIRECT
Press to use the Pure Direct function.
 IN-CEILING SP
Activates the In-Ceiling Speaker Mode.
 Menu operation buttons Used for menu operations displayed on the
TV screen and the display panel of the
receiver.
HOME:
AMP MENU: Displays the menu on the
OPTIONS:
DISPLAY:
RETURN:
 INPUT SETUP
Displays the Input Setup menu.
 AUTO CAL
Press to perform Auto Calibration.
 Tuner control buttons
Used for tuner operations.
 INPUT +/–
Press + or – to select the input source.
 INPUT MODE
Press to select the input mode.
 ZONE2 , ZONE3 
Turns the receiver in zone 2 or zone 3 on or
sets it to standby mode.
 HDMI OUTPUT
Switches the output for two monitors
connected to the HDMI OUT A and HDMI OUT
B jacks.
 Input buttons
Select the device you want to play.
When you press any of the input buttons, the
receiver turns on.
 SOUND OPTIMIZER
Press to use the Sound Optimizer to enjoy
clear and dynamic sound at low volume
levels.
 CUSTOM PRESET (1, 2, 3,
Saves and recalls various settings for the
4) receiver.
 SP SETUP
Displays the Speaker Setup menu.
 TEST (PICTURE, TONE)
Press to output the test picture or test tone.
Displays the home menu on the
TV screen.
display panel of the receiver to
operate the receiver.
Displays the option menus on
the TV screen for item selection.
Displays information on the TV
screen.
Returns to the previous menu.
continued
11
US