Mounting The Rear Wheels; Unfolding The Wheelchair; Mounting Or Removing Of Push Bar - Vermeiren V300 XL Manual De Instrucciones

2.2

Mounting the rear wheels

2.3

Unfolding the wheelchair

L L L L
CAUTION:
Risk of clamping – Keep fingers away from moving parts of the
wheelchair.
1. Position yourself behind the wheelchair.
2. Use the hand-grips to open the wheelchair as much as possible.
3. Position yourself at the front of the wheelchair.
4. Push both seating tubes down till they are fixed in their position.
5. Mount the push bar to the right hand-grip (standing behind the wheelchair)
2.4

Mounting or removing of push bar

1. Take the rear wheel and push on button
2. Keep the button pushed in and mount the rear
wheels axle till it stops.
3. Release the button.
4. Check that the wheels is secured.
The mounting of the push bar is done as follows:
1. Mount the push bar with the star button in
the left hand-grip.
2. Swing the push bar to the right.
3. Mount clip over the right hand-grip
When this is difficult it is possible the push
bar is too long. Place the push bar on the
left-hand-grip with the star button in hole
To take off the push bar:
1. Loosen the star button on the right hand-
grip.
2. Remove clip from the right hand-grip
Page 7
V300 XL
2013-11
.
.
.
.