Publicidad
9. Using the Slow Cooker Function
If you wish to cook using the slow cooker function, press the slow cooker function button to
begin the slow cooking process. The slow cooker function is programmed with a range of
cooking time from 3 hours -10 hours. Simply press the slow cooker function button one time
for each .5 hour (30 minutes) of cooking time you wish to add. For example, if a recipe
requires 5 hours of cooking time press the slow cooker function button and 3 (hours) will
display on the display panel. Press the slow cooker function button until 5 (hours) displays on
the display panel.
The function light will illuminate and the cooking time will display on the display panel
If you accidentally, set too much time, press the keep warm / cancel button to cancel the delay function and
start over.
2. When the working pressure level has been reached a "P" will display on the left side of
display panel. At this point the pressure holding time (which is displayed on the display panel
will begin to decrease in .5 hour intervals.)
3. When the cooking process is complete you will hear a series of beeps signaling the
completion of the cooking process. The indicator light on the keep / warm cancel button will
flash indicating that the pressure inside the cooker is being released but remains at high
level. NOTE: For reasons of your safety, DO NOT open the lid when the pressure is level is
high and the indicator light on the keep warm button is flashing.
When the pressure level is at a safe level and lid of the pressure cooker can be safely re-
moved the indicator light on the keep warm button will stop flashing and will remain on (solid)
indicating the keep warm function has begun.
If you do not want to use the keep warm function simply press the keep warm / cancel button
and the keep warm process will end and the indicator light will
The unit will automatically turn off after 24 hours.
Other Preset Functions
Keep Warm / Cancel Button
Keep Warm: To use this function, press the Keep Warm / Cancel button when the unit is in
Standby mode.
Cancel: To cancel a preset or current working mode press the Keep Warm / Cancel button
when the unit is in working status. The unit will then enter Standby mode.
11
Publicidad
