Connections, Operating And Display Elements - LD Systems CURV 500 IAMP Manual De Usuario

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1
1
DISPLAY
Multi-functional OLED graphics display for information such as preset and audio signal level. It also shows menu items to view system
settings as required.
2
MENU
Combined push-and-turn dial to access the edit menu and select and edit individual menu items.
3
VENTILATION GRILL
In order to avoid overheating of the device, ensure that the ventilation grill is not covered and that air can circulate freely.
4 5 11
4
POWER SOCKET AND FUSE HOLDER
IEC mains socket with built-in fuse holder. A suitable power cable is included.
IMPORTANT: Replace the fuse only with a fuse of the same type. Follow the instructions printed on the housing. In the event of repeated
fuse failure, please contact an authorised service centre.
5
POWER ON / OFF
On / Off switch for power supply to the device.
6
OUTPUT CH A - CH D (speakON-compatible)
SpeakON-compatible loudspeaker outputs for channels A to D. To avoid damage to the equipment, make sure that the total impedance
of the connected speakers is at least 2.7 ohms per channel. The speakON-compatible connectors and the screw connections of each
corresponding channel are wired in parallel.
7
OUTPUT CH A - CH D (screw connection)
Loudspeaker outputs for channels A to D with terminal block connections (screw connectors supplied). To avoid damage to the equipment,
make sure that the total impedance of the connected speakers is at least 2.7 ohms per channel. The speakON-compatible connectors and
the screw connections of each corresponding channel are wired in parallel.
8
INPUTS 1 - 4 (3-pin XLR)
Balanced line inputs for channels 1 to 4 with 3-pin XLR sockets. The XLR sockets and the terminal block connections of each corresponding
channel are wired in parallel.
9
INPUTS 1 - 4 (terminal block connections)
Balanced line inputs for channels 1 to 4 with terminal block connections (connectors supplied). The XLR sockets and the terminal block
connections of each corresponding channel are wired in parallel.
10
DATA USB
USB interface (Type B) for updating device firmware and loudspeaker presets, managing global presets and resetting the lock PIN. The
corresponding Windows PC programme and current update files can be found along with a manual in the download area of the product at
WWW.LD-SYSTEMS.COM
11
HOUSING FAN
In order to avoid overheating of the device, ensure that the fan is not covered and that air can circulate freely.
2
6
3
7 9
11
10
8
5