Before The First Use; Functions Of Control Panel - Princess Smart Dehumidier 01.353120.01.001 Manual De Usuario

BEFORE THE FIRST USE

• Place the unit in the correct upright position before unpacking.
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
• Please ensure the unit is not placed against objects which will
obstruct air intake e.g. furniture or curtains as this will affect its
performance dramatically.
• Please don't place or operate the unit in a narrow place
• Do not place the unit in full sun as it might shut down due to
overheat and the color of the unit may soon fade out.
• Do not place the unit in a humid place.
• A distance of 20cm minimum must be kept between the unit and
the wall or any other obstacles.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the
local voltage before connecting the device. Voltage 220V-240V
50Hz).

FUNCTIONS OF CONTROL PANEL

• Power button: Press to turn ON/OFF the unit. When powered
on the current humidity level will be shown. The unit will begin in
"CO" (Continuous) mode as default.
• Mode: use to switch between the different modes.
– Dehumidify (Auto or Manual operation)
– Fan (Fan mode only)
– Laundry (Full power mode)
• Up-Down: Set the required humidity: "CO" (continuous), 30 to
90% and "AU" (Automatic). The default mode is "CO". Note:
Press up and down at the same time to convert the display from
Humidity to Temperature. The display will go back to Humidity
after 5 seconds.
• Speed: Fan speed can be switched between high or low.
Note: In comfortable mode ("AU") with a room temperature above
27 degree and in Laundry mode the fan speed is fixed and
cannot be adjusted.
• Timer (Regular time range 01-24 hours):
Instruction manual
EN
7