Empty The Water Tank; Filter Cleaning - Princess Smart Dehumidier 01.353120.01.001 Manual De Usuario

Instruction manual

EMPTY THE WATER TANK

• When the drainage tank is full, the tank full indicator light will turn
on, the operation will stop automatically and the buzzer will beep
15 times.
• Gently press on the sides of the tank and pull the tank out with
both hands.
• Empty the water tank above a sink.
• Do not remove the float from the water tank, otherwise the water
sensor cannot detect the water level, causing the unit to
malfunction.
• If the tank is dirty, use water for cleaning. Do not use gasoline or
other chemicals, because it may damage the water tank and
cause water leakage.
10
• Press the tank tightly with both hands to put it into place.
• If the water tank is not positioned correctly, the full water sensor
will remain active and the dehumidifier will not work.

FILTER CLEANING

• Take the filter out of the unit.
• Clean the filter using a vacuum cleaner to gently absorb dust on
the filter screen surface.
• Use some warm water and a mild detergent if it is very dirty.
Make sure the filter is completely dry before you put it back.
• Push the two hooks to put the filter back into the unit.