SEVERIN SM 3738 Instrucciones De Uso página 13

∙ Replace the lid so that the spout is
completely covered.
∙ The lid must be fi tted at all times
whenever the mixer is operated.
∙ To add ingredients during operation, the
stopper in the centre of the lid can be
removed. Do not put any objects into
the blender jug while the appliance is
operating.
∙ Insert the plug into the wall outlet and use
the rotary control to select the required
power setting.
∙ Caution: Do not operate when the
blender jug is empty. Do not fi ll it with dry
items only, such as nuts, almonds etc.
∙ After using the blender, switch off and
remove the plug from the wall socket.
Wait until the motor has come to a
complete standstill before removing the
blender jug.
Using the multi-mixer to crush ice
Ice-cubes can be easily crushed in the
blender jug:
Fill the jug a quarter full with ice cubes, and
then fi t it to the motor housing, as described
in the section Multi-mixer operation. Put on
the lid with the stopper in place, and use the
pulse function (P) to operate the appliance
for about 2 seconds. Wait until the ice cubes
have collected in the bottom of the jug again
and then repeat the process, until the cubes
have been reduced to the required size.
Grinding top operation
∙ The grinding top is useful processing
spices, and for preparing pesto, dips and
purées.
∙ Cut the food to be processed into small
pieces and then put it into the grinding
top.
∙ Observe the maximum marking when
putting in the food. Do not overfi ll.
∙ Caution: Do not operate the appliance
when it is empty.
∙ Fit the blade unit in the grinding top and
turn it anti-clockwise all the way to lock it.
∙ Turn the grinding top over and fi t it to
the motor housing so that the two arrow
marks are aligned.
∙ Then turn it clockwise until it is heard
locking into place.
∙ Insert the plug into a suitable outlet and
use the rotary control to select the desired
speed setting or the pulse function (P).
∙ Remove the plug from the wall socket
after grinding. Wait until the motor has
come to a complete standstill before
removing the grinding top and the blade
unit.
Wind-up power cord storage
The power cord can be wound up for storage
on the underside of the unit. Unwind it
completely before operation.
Cleaning and care
∙ Always remove the plug from the wall
socket before cleaning the appliance.
∙ To avoid the risk of electric shock, do not
clean the motor housing or the power
cord with water and do not immerse them
in water. The motor housing may be
wiped with a slightly damp, lint-free cloth.
∙ Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning.
∙ Cleaning the blender jug:
To clean immediately after use,
fi ll the blender jug with around 700 ml
of warm water and a little detergent. Let
the appliance run for a short period as
described in the section Operation. Then
13