Blackmagic Design Teranex Mini Instrucciones De Funcionamiento página 51

8 Ethernet PoE+
Connects to a network switch or computer so you can change settings using
Blackmagic Teranex Setup. The Ethernet port also supports power over Ethernet.
9 SDI In
SDI video input BNC connector.
10 SDI Out
SDI video output BNC connector.
11 L – Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU audio input XLR connector.
12 R – Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU audio input XLR connector.
Can also be configured for timecode input.
Switches
Teranex Mini Audio to SDI 12G's switches provide the following settings:
Switch 8, 7 – Input Audio Selection Bit 1, 0
Switches 8 and 7 are represented as bits 1 and 0, respectively. This simply means that by setting
various on/off combinations for switches 8 and 7 you can select from four input audio options.
Switch 6, 5, 4 – Embed Audio Bit 2, 1, 0
Switches 6, 5, and 4 are represented as bits 2, 1, and 0, respectively. This simply means that by
setting various on/off combinations for switches 6, 5, and 4 you can select which channels of
your SDI signal you wish to embed audio into.
If you are embedding analog audio, there are eight combinations, allowing you to embed audio
into the channel pairs from 1-2 through to 15-16.
If you are embedding AES/EBU audio, there are four combinations. You can select between
embedding audio into channels 1 to 4, 5 – 8, 9 – 12, or 13 – 16
The switch legend on the base of your converter gives you
all the information you need to change conversion settings.
Teranex Mini – Audio to SDI 12G 51