Connectors
1
Mini-B USB Port
Connects to the Blackmagic Teranex Setup software via a Mac or Windows computer
for adjusting settings and updating your Teranex Mini's internal software.
2
Switches
Adjustable switches for changing settings.
3
LED Status Indicator
Glows white when the converter is receiving power and green when a valid video input
signal is detected. Will flash on/off to identify individual converters via Blackmagic
Teranex Setup.
4
Power
Standard built in IEC C14 connector for 90 – 240 volt AC power supply.
5
Y or NTSC/PAL
Analog component Y, NTSC or PAL composite output BNC connector.
6
B-Y or S-VIDEO Y
Analog component B-Y, or S-Video Y output BNC connector.
7
R-Y or S-VIDEO C
Analog component R-Y, or S-Video C output BNC connector.
8
Ethernet PoE+
Connects to a network switch or computer so you can change settings using
Blackmagic Teranex Setup. The Ethernet port also supports power over Ethernet plus.
9
SDI In
SDI video input BNC connector.
10
Optical Input and Output
Optical video input and output LC connectors via optional SMPTE compatible
SDI optical fiber module. The optical input automatically detects between
SD/HD/6G/12G-SDI. The optical output can be used as a loop through output.
11
L – Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU audio output XLR connector.
12
R – Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU audio output XLR connector.
Can also be configured for timecode output.
Switches
Teranex Mini – Optical to Analog 12G's switches provide the following settings:
Switch 8 – Analog Audio, AES/EBU Audio
Set switch 8 to 'off' to select balanced analog audio, or to 'on' for digital AES/EBU audio output.
Switch 7 – 7.5 IRE, 0.0 IRE
The USA and countries using NTSC with 7.5 setup should set switch 7 to 'off'. If you're working
in countries not using 7.5 setup, for example Japan, set switch 7 to 'on'. This setting only affects
composite or S-Video outputs.
Teranex Mini – Optical to Analog 12G
76