Automotive Servicing Safety Guide - EGAmaster EGAtronik 51259 Manual De Instrucciones

inflammable and strong magnetic field. The performance of the Meter may deteriorate after
dampened.
- The Meter is suitable for indoor use.
Warning!
As some automobiles are installed with safety air bags, you must pay attention to the cautions
in the automotive servicing manual when you are working around the components and wiring of
the air bags, or any carelessness will open an air bag, resulting in some personal injury. Note that
the air bag will also be opened for a few minutes after the ignition lock is closed (or even when the
automotive battery is cut off), which is driven by the special energy reserve.
To prevent an accident from causing any personal injury or any damage to an automobile or any
of its meters, please read the following safety guidelines and testing procedure in earnest:
- Wear protective eyeglasses which meet safety requirements.
- Operate the automobile in a well-ventilated place so as to prevent the inhalation of any toxic
tail gas.
- Keep your own tools and testing instruments far from all the heater components of the
operating engine.
- Ensure that the automobile has stopped (automatic transmission) or put into neutral gear
(manual transmission) and be sure that it is equipped with brakes and the wheels have been locked.
- Do not place any tool on the automotive battery which will cause a short circuit of the
electrodes and in turn lead to any personal injury or damage to a tool or battery.
- Smoking or striking a light near the automobile is prohibited.
- Pay attention to ignition coil, an ignition lead or a spark plug socket because these components
are provided with high voltages when the automobile is operating.
- To connect or cut off an electronic component, close the ignition lock.
- Pay attention to the automotive producer's cautions, notes and servicing procedures.
All the information, explanations and detailed descriptions in the operation manual have
originated from the industrial information recently published.
It is impossible to prove the accuracy and completeness of the information, of which we shall
not be responsible for the assumption.
A. The data of the automotive servicing manual have originated from the automotive servicing
information.
1. Contact the local distributors of automotive components.
2. Contact the local retailers of automotive components.
3. Contact the local libraries to look up any book for the proofreading of your automotive
servicing manual so as to provide you with the latest information.
B. Before the diagnosis of any trouble, open the engine hood to make a thorough visual
inspection.

AUTOMOTIVE SERVICING SAFETY GUIDE

29