Continuity Testing; Battery; Temperature; Frequency - EGAmaster EGAtronik 51259 Manual De Instrucciones

Remark:
- Open circuit voltage approximate 2.7V.
- The silicon PN junction normal voltage is about 500 mV to 800 mV.
F. Continuity Testing
Range
Remark:
- Open circuit voltage approximate 2.7V.
- The buzzer does not sound when the resistance value is >100Ω. The circuit is disconnected.
- The buzzer sounds continuously when the resistance value is ≤10Ω. The circuit is in good
condition.
- The buzzer may or may not sound when the resistance value is between 10Ω ~100Ω.
G. 12V Battery
Range
20V
Remark:
- The Meter has a built-in 120Ω/2W loaded resistance, the measured value shown on the display
is the value of the loaded battery.
H. Temperature
Range
-40ºC ~ 1000ºC
Remark:
Overload Protection: Fuse 315mA, 250V, fast type, Ø5x20mm.
I. Frequency
Range
2kHz
Remark:
- Overload Protection: 600Vp.
46
Resolution
1Ω
Resolution
10mV
Resolution
1ºC
Resolution
1Hz
Overload
Protection
Accuracy
±(3%+5)
Accuracy
-40ºC ~ 0ºC: ±(3%+9)
0ºC ~ 400ºC: ±(1%+7)
400ºC ~ 1000ºC: ±(2%+10)
Accuracy
±(2%+5)
600Vp
Overload
Protection
Fuse 315mA,
250V, fast type,
Ø5x20mm