Address Parameters; Alarm Settings - CARLO GAVAZZI WM20 Manual De Instrucciones

Address parameters

The address parameters are divided into two parts: first part (HI) on page 1/2 and second
part (LO) on page 2/2. For example the pages IP add 1/2 and IP add 2/2 with the address
set as 192.168.2.18 will be as follows:
The order of digit selection is from right to left on the firstline and then on the second line.

Alarm settings

WM20 manages two alarms. The following is defined for each alarm:
• variable to be controlled (Variables), selectable from all measured electrical variables
excluding the maximum power values
• alarm activation threshold (Set1)
• alarm activation delay (On delay)
• alarm deactivation threshold (Set 2)
To set the alarms, see "Settings menu" on page 24, to check the status of set alarms,
see "Information menu" on page 32.
46
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA