Trouble-Shooting - FactoryCat MINIMAG Manual De Instrucciones

PROBLEM
NO POWER - NOTHING OPERATES
SCRUBMOTOR DOES NOT OPERATE
VACUUM MOTOR DOES NOT OPERATE
INSUFFICIENT SOLUTION FLOW
NO SOLUTION FLOW
POOR WATER RECOVERY
M M -OP-ES
INI AG

TROUBLE-SHOOTING

CAUSE
FAULTY POWER SWITCH
BATTERIES NEED CHARGING
FAULTY BATTERIES
LOOSE BATTERY CABLE
MAIN CIRCUIT BREAKER TRIPPED
GREEN DRIVE BUTTON IS NOT
DEPRESSED
CIRCUIT BREAKER TRIPPED
FAULTY SCRUBDECK MOTOR OR
WIRES
FAULTY VACUUM SWITCH
CIRCUIT BREAKER TRIPPED
FAULTY VACUUM MOTOR
CARBON BRUSHES WORN
SOLUTION TANK LOW
FLOW LEVER TURNED DOWN
SOLUTION FILTER CLOGGED
SOLUTION LINE CLOGGED
SOLUTION VALVE CLOGGED
NO SOLUTION IN TANK
SOLUTION SWITCH IS OFF
SOLUTION SCREEN CLOGGED
FAULTY SOLUTION SOLENOID
FAULTY SOLUTION SWITCH
RECOVERY TANK IS FULL
BALL / SCREEN IS CLOGGED
VACUUM HOSE IS CLOGGED
SQUEEGEE IS CLOGGED
SQUEEGE BLADE IS WORN
FAULTY VACUUM HOSE
VACUUM MOTOR GASKET TORN
TANK GASKET FAULTY
DRAIN PLUG LOOSE
VACUUM MOTOR FAULTY
BATTERY CHARGE LOW
SOLUTION
CONTACT LOCAL SERVICING DEALER
SEE CHARGING BATTERIES
REPLACE BATTERY
TIGHTEN LOOSE CABLE
WAIT 5 MINUTES FOR AUTO RESET
DETERMINE CAUSE AND CORRECT
DEPRESS BUTTON ON HANDLE BAR
RESET & REDUCE PRESSURE
CONTACT LOCAL SERVICING DEALER
REPLACE SWITCH
RESET & CHECK HOSE
DETERMINE CAUSE AND CORRECT
CONTACT LOCAL SERVICING DEALER
CONTACT LOCAL SERVICING DEALER
REFILL SOLUTION TANK
TURN LEVER MORE OPEN
REMOVE COVER AND CLEAN
REMOVE AND BLOW OUT WITH COM-
PRESSED AIR
REMOVE COVER AND CLEAN
FILL SOLUTION TANK
TURN SOLUTION SWITCH ON
REMOVE AND CLEAN SCREEN
CONTACT LOCAL SERVICING DEALER
CONTACT LOCAL SERVICING DEALER
EMPTY RECOVERY TANK
REMOVE SCREEN AND CLEAN
REMOVE DEBRIS
REMOVE DEBRIS
ROTATE OR REPLACE BLADES
CONTACT LOCAL SERVICING DEALER
CONTACT LOCAL SERVICING DEALER
CONTACT LOCAL SERVICING DEALER
TIGHTEN PLUG
CONTACT LOCAL SERVICING DEALER
CHARGE BATTERIES OVERNIGHT
- 31 -