Pausing Recording - Tascam 202 MKVII Manual Del Usuario

3
Adjusting the recording level.
Before recording, adjust the recording level . If the recording
level is not suitable, the sound of the recording could be dis-
torted (level too high) or noisy (level too low) .
1. Play the source (external source) to be recorded.
Examples:
Play the input source of a connected amplifier .
Play the connected audio player .
Tune in a station on a connected radio tuner .
2. Use the REC LEVEL (recording level) knob so that the
peak level meter never reaches 0.
o The volume may differ depending on the recording source .
In order to record different sources at appropriate volumes,
you must adjust the recording level for each source .
4
Press the PAUSE button to start recording.
The 9 disappears, and
ATTENTION
Never turn the power off or disconnect the power cord during
recording.
Doing so could cause the tape to become stuck, for example.

Pausing recording

Press the PAUSE button .
Press it again to resume recording .
Stopping recording
Press the stop (8) button .
o When source playback stops, recording does not automatically
stop .
and appear on the display .
19