Tascam 202 MKVII Manual Del Usuario página 28

Timer-controlled playback and recording (continued)
6
Adjusting the recording level.
Before recording, adjust the recording level . If the recording
level is not suitable, the sound of the recording could be dis-
torted (level too high) or noisy (level too low) .
1. Play the source (external source) to be recorded.
2. Use the REC LEVEL (recording level) knob so that the
peak level meter never reaches 0.
o The volume may differ depending on the recording source .
In order to record different sources at appropriate volumes,
you must adjust the recording level for each source .
28
7
Set the timer to your desired start (power on)
and stop (power off) times.
When this setting is completed, the power to all components
should be turned off .
At this time, do not press this unit's POWER button.
Leave the button pushed in (the on position). If the
POWER button is in the off position, timer recording will
not function.
When the timer on time is reached, the timer will supply power
to the connected devices and recording will start .
o When you do not want to use the timer, be sure to set the
TIMER switch to OFF to prevent accidentally recording over
an important cassette tape .