Special Applications; Transportation And Storage; Information For - ITT Lowara FHS-ATEX3 Serie Instrucciones Suplementarias Para La Instalacion Y El Uso

3.1.6 Number of Starts per Hour
Please read the motor operating instructions supplied with the electric pump.
3.1.7 Installation Site
Make sure that the pump is suitable for use in the classified area (according to Directive 1999/92/EC) and for the nature of any flam-
mable substances present (gas, vapour, mist).
According to Directive 1999/92/EC, Category 3 equipment is suitable for use in Zone 2 areas only.
This electric pump is not suitable for installation in sites where the danger of explosion is due to the presence of flamma-
ble powders.
This electric pump is not suitable for mining applications.
Protect the pump from the weather (rain, wind,...) and freezing temperatures.
WARNING
Provide adequate ventilation for motor cooling purposes.
Ambient temperature -20°C to +40°C as provided by EN 50014.
Relative ambient humidity must not exceed 50% at +40°C.
For conditions other than those specified above, please contact our Sales and Service Department.
Provide adequate lighting and clearance around the electric pump. Make sure it is easily accessible for installation and maintenance operations.
Make sure that any fluid leaks or other events of this nature will not lead to flooding of the installation site and consequent submersion of the electric pump.
3.1.8 Power Supply Requirements
Make sure that the supply voltages and frequencies are suited to the characteristics of the electric motor. Refer to the motor rating plate.
WARNING
3.1.9 Sound Emission Level
Refer to the relevant electric pump manual.
3.2

Special Applications

For any condition or situation (nature of the liquid, installation,...) other than those described in this manual, please contact our Sales
WARNING
and Service Department
If you need to replace or modify the impeller in order to reduce the pump performance, do not disassemble the pump but contact our
Sales and Service Department.
3.2.1 Improper Use
If you use the electric pump improperly, you may create dangerous conditions and cause personal injury and damage to property.
Here are a few examples of improper use :
- pumping liquids that are not compatible with the pump construction materials
- pumping hazardous (toxic, explosive, corrosive) liquids
- pumping drinking liquids (wine, milk,......)
- installing the electric pump in a location where the air temperature is very high and/or there is poor ventilation
- installing the electric pump outdoors without protection against rain and/or freezing temperatures
- using the pump for flow rates beyond those specified in the rating plate.
3.3 Warranty
Please refer to the sale contract for any information.

4. Transportation and Storage

4.1 Transportation and Handling of Packed Product
The electric pumps are packed in cartons or wooden crates having different dimensions and shapes.
The packing is designed for transportation and handling in the horizontal position. Protect the product against humidity, heat sources
WARNING
and mechanical damage (collisions, falls, ...).
Lift and handle the product carefully, using suitable lifting equipment. Observe all the accident prevention regulations.
When you receive the electric pump, check the outside of the package for any signs of damage. If the product appears to be damaged, notify our distributor
within 8 days from the delivery date.
4.2 Storing the Packed Product
Ambient temperature -5°C a +40°C .
The packing is designed for transportation and handling in the horizontal position. Protect the product against humidity, heat sources
WARNING
and mechanical damage (collisions, falls,...).
Lift and handle the product carefully, using suitable lifting equipment. Observe all the accident prevention regulations.
en
information for carriers
13