Bluetooth Connection; Pairing This System With A Bluetooth Device - Sony GTK-XB60 Manual De Instrucciones

BLUETOOTH connection

Pairing this system with
a BLUETOOTH device
Pairing is an operation in which
BLUETOOTH devices register each
other beforehand. Once the pairing
operation has been performed, it does
not need to be performed again for
those devices.
If your device is an NFC-compatible
smartphone, the manual pairing
procedure is not necessary. (See "One
Touch BLUETOOTH Connection by NFC"
(page 17).)
1
Place the BLUETOOTH device
within 1 meter (3 feet) from
the system.
2
Select the BLUETOOTH
function.
 Press  to turn on the system.
 Press FUNCTION
repeatedly until the
(BLUETOOTH) indicator on
the unit flashes slowly.
Hint
When there is no pairing information
on the system (for example, when
you use the BLUETOOTH function
for the first time after purchase), the
(BLUETOOTH) indicator flashes quickly
and the system enters the pairing mode
automatically. In this case, proceed to
step 4.
3
4
PAIRING
5
Hold down FUNCTION
PAIRING for more than
3 seconds.
Voice guidance ("Bluetooth
pairing") will be output and the
(BLUETOOTH) indicator will flash
quickly.
Bluetooth
pairing
Turn on the BLUETOOTH
function on the BLUETOOTH
device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
Select "GTK-XB60" or
"GTK-XB90" on the display of
the BLUETOOTH device.
Note
If passkey is required on the BLUETOOTH
device, enter "0000." "Passkey" may
be called "Passcode," "PIN code," "PIN
number," or "Password."
15
GB