Notes On Using The Lcd Panel; Adjusting The Lcd Panel Angle; Inserting/Ejecting/Connecting Media; On First-Time Startup - Pioneer AVH-X490BS Manual De Instrucciones

Basic operation
1 Volume (+/–)
2 MODE Press to switch between the Application
screen and the AV operation screen.
Press and hold to switch to the camera view
mode.
3 SRC Press to cycle through all the available
sources.
Press and hold to turn the source off.
4 TOP Returns to the top menu during DVD playback.
MENU
5 MENU Displays the DVD menu during DVD playback.
6 Thumb Selects a menu on the DVD menu.
pad
7 MUTE
8 AUDIO Changes the audio language, subtitle lan-
SUBTITLE guage or viewing angle during DVD playback.
ANGLE
9 BAND/ Selects the tuner band when tuner is selected
ESC as a source.
Cancels the control mode of functions.
Switches between media file types when play-
ing the data of Disc, USB.
10 RETURN Returns to the specified point and begins
playback from there.
11 Pauses or resumes playback.
For audio: Press and hold to perform fast
or
reverse or fast forward.
For video: Press to perform fast reverse or fast
forward.
Press to return to the previous track (chapter)
or
or go to the next track (chapter).
Press to answer or end a call.
Stops playback.
If you resume playback, playback will start
from the point where you stopped. Touch the
key again to stop playback completely.
12 FOLDER/P. Selects the next or previous disc or folder.
CH Recalls radio station frequencies assigned to
preset channel keys.
8

Notes on using the LCD panel

WARNING
Do not use with the LCD panel left open. It may result in injury
in the event of an accident.
CAUTION
 Keep hands and fingers clear of this product when
opening, closing, or adjusting the LCD panel. Be especially
cautious of children's hands and fingers.
 Do not open or close the LCD panel by force. It may cause
a malfunction.

Do not operate this product until the LCD panel has
completely opened or closed. The LCD panel may stop at
that angle for safety.

Do not place a glass or can on the open LCD panel.

Adjusting the LCD panel angle

X490BS
1 Press the button.
2 Touch or to adjust the angle of the
LCD panel.
3 Touch .
Returns to the previous screen.
Inserting/ejecting/connecting
media
CAUTION
Do not insert anything other than a disc into the disc-loading
slot.
Inserting and ejecting a disc
Inserting a disc
X490BS
1 Press the button.
2 Touch to open the LCD panel.
3 Insert a disc into the disc-loading slot.
Ejecting a disc
X490BS
1 Press the button.
2 Touch to open the LCD panel.
3 Remove the disc, and press the
Inserting a disc
X390BS
1 Insert a disc into the disc-loading slot.
Ejecting a disc
X390BS
1 Press button to eject a disc.
Plugging and unplugging a USB stor-
age device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1
2
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.

On first-time startup

1 Start the engine to boot up the system.
The "Select Program Language" screen appears.
button.