Tabla De Contenido; Safety Instructions; Technical Data; Symbols - Festool RO 125 FEQ Manual De Instrucciones

Contents
Safety instructions .......................... 3
Technical data ................................. 3
Symbols .......................................... 3
Intended use ................................... 5
Electrical connection and operation . 5
Extension cord ................................. 6
Electronic control ............................ 6
Tool settings ................................... 7
Dust extraction ................................ 7
Edge protector ................................ 7
Sanding motion ................................ 7
Choice and installation of sanding pads 8
Attaching the abrasive ....................... 9
Securing polishing attachments .......... 9
Working with the tool ...................... 9
Metalworking ................................. 10
Systainer ....................................... 10
Maintenance and care ................... 10
Sanding pad brake .......................... 11
Accessories, tools .......................... 11
Warranty ....................................... 11
Conditions of 1+2 Warranty ............. 11
Festool Limited Warranty ................. 11
Table A: Sanding ........................... 13
Table B: Polishing .......................... 13
WARNING! Read all safety warn-
ings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1 WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in ex-
plosive atmospheres, such as in the
ROTEX RO 125 FEQ
Wattage
No load speed
Sanding stroke
Sanding base dia.
Weight
Safety level
V
A
Hz
W
~
n
0
min
rpm
Ø

Safety instructions

presence of fl ammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2 ELECTRICAL SAFETY
a) Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Un-
modifi ed plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
3

Technical data

Symbols

Warning of general danger
Read the Operating Instructions/
Notes!
Wear protective goggles
Volts
Amperes
Hertz
Watt
Alternating current
No load speed
Class II Construction
-1
Revolutions per minute
Diameter
500 W
3000 - 6000 rpm
3.6 mm (0.14 in.)
125 mm (4.9 in.)
1.9 kg (4.2 lbs.)
/II