Applications; Preparation Before Operation - Hitachi Koki C 10FCB Manual De Instrucciones E Instrucciones De Seguridad

English

APPLICATIONS

Wood, plywood, color board, soft fabric board, hard board similar materials and aluminum sash.

PREPARATION BEFORE OPERATION

Make the following preparations before operating the power tool:
1. Installation
5-5/16" (160 mm)
Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.
Select 5/16" (8 mm) diameter bolts suitable in length for the thickness of the work bench.
Bolt length should be at least 1" (25 mm) plus the thickness of the work bench.
For example, use 2" (50 mm) or larger bolts for a 1" (25 mm) thick work bench.
2. Releasing the locking pin
Locking
Pin
Fig. 5
3. Installing the dust bag, holder and vises. (The holder is optinal accessory.)
Attach the dust bag, holder, and vises as indicated in Fig. 1.
10
11/32"
(9 mm)
3 Holes
13-3/8" (340 mm)
When the power tool is prepared for shipping, its main parts are
secured by a locking pin.
Move the handle (see Fig. 1) slightly so that the locking pin can be
disengaged.
During transport, lock the locking pin into the gear case.
NOTE:
Base
Work Bench
Fig. 4
Lowering the handle (see Fig. 1) slightly will enable you
to disengage the locking pin more easily safely.
The lock pisition of the locking pin is for carrying and
storage only.
5/16" (8 mm) Bolt
5/16" (8 mm) Nut