Battery Replacement; Replacement Parts - Dentsply Maillefer EndoActivator Manual De Instrucciones

Maillefer Instruments
CH – 1338 Ballaigues
Switzerland

6.2) BATTERY REPLACEMENT

The EndoActivator handpiece comes with one (1) "AA" alkaline battery.

6.3) Replacement parts

Battery Housing Replacement Part
In case of failure on the removable battery housing, you can order a replacement part ref.: A0915
Rocker arm replacement kit
In case of broken distal end of the rocker arm, you can order a replacement part ref.: A0916
6.4) DISINFECTION
For infection control, select the appropriately sized EndoActivator tip and remove it from the plastic
package. The Activator tip should be cleaned and disinfected, with a gauze moistened with a
disinfecting solution such as sodium hypochlorite.
IMPORTANTLY, the Activator tips are intended for single-patient use only.
Use a barrier sleeve over the entire handpiece. Upon removing the barrier sleeve, the outer surface of
the handpiece may be wiped down with a mild detergent or disinfecting solution. DO NOT submerge
the handpiece in any disinfecting solution or autoclave. Never over-saturate the handpiece with any
disinfecting solution.
7) ENDOACTIVATOR WARRANTY INFORMATION
Implied Warranties
Endo Inventions guarantees its product for a period of one year after the date of purchase. If any
defect due to faulty materials and workmanship occurs within this one-year period, Endo Inventions
will repair or replace the product at its expense.
The warranty does not cover product and/or product parts that are subject to wear and that can be
considered as consumable parts by their nature or that are made of silicone.
The warranty is not valid if a defect is due to damage caused by incorrect use, poor maintenance, or if
alterations or repairs have been carried out by persons not authorized by Endo Inventions.
ZF1902109.X / 03/ 2009 –updated 03/2011
• To remove the battery housing, firmly grasp the contra-angled portion of the
handpiece with one hand and begin turning the non-removable, screw knob
counterclockwise with your other hand.
• Rotate the screw knob counterclockwise to progressively disengage the
battery housing and remove it from the handpiece. Replace with a high
quality lithium battery.
• To close compartment, slide housing over the new battery and position the
EndoActivator logo as pictured above. ALIGN the orientational tracks within the
grooves, and turn the screw knob clockwise until snug.
4/36