Avanti IMC132A3S Manual De Instrucciones página 17

suddenly while
making ice.
The body of the ice
maker is electrified
Scaling occurs
frequently inside the
machine.
Water leaks from the
ice storage bin
The room temperature is out of
the stated range.
The ice storage bin is full of ice.
The ground line isn't in the
socket.
The hardness level of the water
is too high.
The drain hole below the ice
storage bin is blocked.
The drain hose is kinked or
improperly placed higher than
the floor of the ice storage bin.
Cut off the electricity and leave the ice maker
disconnected until the temperature returns to
within the stated range.
Remove some ice cubes; make sure the ice-full
probe is free of ice.
Use a socket meeting the grounding
requirements.
Install a water-softening device in front of the
water inlet.
Remove the ice storage bin and clean the drain
hole.
Check the drain hose to be sure water can be
drained out unhindered.
17