Anti-Tip Bracket Installation - Avanti ER2001G Manual De Instrucciones


ANTI-TIP BRACKET INSALLATION
To reduce the risk of tipping the range by abnormal usage or improper door loading, the range must
be secured by properly installing the anti-tip device packed with the appliance.
•
Place the anti-tip bracket on the floor as shown figure. Anti-tip bracket can be installed on either
right or left side.
•
Make the locations of 2 holes of ant-tip bracket on the floor.
•
Use a 5/16" masonry drill bit and insert plastic anchor.
•
Secure bracket to floor using screws supplied.
•
Slide appliance into position.
NOTE: If range is relocated, the bracket must be removed and installed in new location.
ATTENTION:
OVENS VARY:
COOKING TIMES AND OVEN TEMPERATURES MAY NEED ADJUSTMENT
AVISO:
HORNOS PUEDEN VARIAR
EL TIEMPO DE COCCION PUEDE VARIAR. EN ESE CASO AJUSTES DE LA
TEMPERATURA PUDIERAN SER NECESARIOS
:
15