Threading Yarns Into The Needle - Silvercrest KH 4300 Instrucciones De Uso

Thread tension selector 2 e
4. Pull the end of the thread about 10 cm (4") out
from the looper eyelet.
5. Lift the sewing foot o and slide the thread under
it; then lower the sewing foot o back down. The
lever for lifting and lowering the sewing foot o
is located at the rear of the machine, above the
sewing lever rod system.
Position the lever to lift the sewing foot o
Thread routing behind the front flap 8
Thread routing on from the thread guide plate 8

Threading yarns into the needle

For simplification, the individual steps are numbered
on the illustrations (1
1. Turn the handwheel 6 to yourself until the needles
stand fully at the top.
2. Thread the left and right yarns as shown.
Thread tree 1 (on the left)
Thread guide r and thread guide plate t
(on the left)
- 52 -
q w e r
, 2 , 3 , 4 , ...).