Safety & Warranty
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures not
improper use.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Installation
PROPER LOCATION
•
To ensure that your beer keg fridge works to the maximum efficiency it was designed for, keep it in a
location where there is proper air circulation and electrical outlets.
•
Choose a location where the beer keg fridge will be away from heat and will not be exposed to direct
sunlight.
•
This beer keg fridge is designed for indoor use only - it should not be used outdoors.
•
This beer keg fridge is a freestanding design and should not be placed in a built in or recessed area.
•
Beer keg fridge unit dimensions:
21.3" x 33.2" (with casters) x 26.6"
•
The following dimensions are recommended for clearances around the beer keg fridge:
Sides: 5" (12cm).
Back: 5" (12cm).
ASSEMBLY INSTRUCTIONS
Read assembly instructions carefully to ensure that you understand all installation instructions before installing
the beer keg fridge. If after completing the process you are still unsure whether the beer keg fridge has been
properly installed, we recommend that you contact a qualified installer.
Installing the casters
Follow the steps below to install the casters.
1. Empty the inside of the cabinet completely and lay the beer keg fridge on it's side. We recommend that you
place a piece of cardboard or cloth underneath the cabinet to prevent dents or scratches.
2. Insert the casters into the holes on the bottom corners of the cabinet. Tighten each caster by turning the
nut clockwise with a wrench (not provided in the kit).
3. Once all four casters have been tightened, stand the cabinet in its upright position.
6