Voice Parameters - Yamaha DTXPRESS II Manual De Instrucciones

Drum Kit Voice Edit Mode
Drum Kit Voice Edit Mode Function List

1. Voice Parameters .................................................... 16

1-1. Voice ................................................................ 17
1-2. Volume, Pan .................................................... 17
1-3. Tuning .............................................................. 17
1-4. Layer Balance .................................................. 18
1-5. Decay, Cutoff Frequency ................................. 18
1-6. Note Number ................................................... 18
1-7. Channel, Gate Time ........................................ 18
2. Input Common Parameters .................................... 19
2-1. Cross Fade ...................................................... 19
2-2. Reverb Send .................................................... 19
2-3. Alternate Group, Key Assign Mode ................. 19
2-4. Hold Mode ....................................................... 20
2-5. Key Off Enable ................................................ 20
2-6. Function ........................................................... 20
2-7. Pad Song ......................................................... 20
2-8. Rim to Pad ....................................................... 21
3. Reverb Parameters ................................................. 21
3-1. Reverb Type, Time ........................................... 21
3-2. Reverb Master Return ..................................... 21
4. Setup ....................................................................... 22
4-1. Program Change, Bank Select ........................ 22
4-2. Volume, Pan .................................................... 22
4-3. Drum Kit Voice Copy ....................................... 22
5. Drum Kit Common Parameters ............................. 23
5-1. Volume ............................................................ 23
5-2. Drum Reverb Send .......................................... 23
5-3. Hi-Hat Sensitivity ............................................. 23
5-4. Song Select ..................................................... 23
5-5. Drum Kit Name ................................................ 23
16
Page
Sets the voice for each input source of the pad.
The Input Source is trigger data that is transmitted by the pads or
trigger sensors connected to input jacks 1-10 of the DTXPRESS II.
When monaural pads TP60/65/80, KP60/80, PCY60/80, DT10/20,
etc. are used, one Input Source will be assigned to one input jack.
When stereo pads TP65S/80S, PCY65S/80S, etc. are used, two
Input Sources (pad input and rim switch input or 2 kinds of pad
input, etc.) will be assigned to one input jack.
When a 3-zone pad such as the TP65S, etc., is used, three Input
Sources (two pad inputs and a rim switch, etc.) will be assigned to
one input jack.
The Voice Parameter is divided into the following 7 pages.
1-1. Voice ................................................................ 17
1-2. Volume Pan ..................................................... 17
1-3. Tuning .............................................................. 17
1-4. Layer Balance .................................................. 18
1-5. Decay, Cutoff Frequency ................................. 18
1-6. Note Number ................................................... 18
1-7. Channel, Gate Time ........................................ 18
Select the Input Source for Editing
In Voice Parameter edit display, first it is necessary to select the
input source q for editing.
Also, 2 voices/key on events/occurrences (2 voices delivered with
one strike of the pad) can be assigned to one trigger input. This use
is called "2 layer". When a 2 layer is used, assign the layer number
w that is used.
KIT IN=kick
=K/019 MapleA20
q IN (Input Source)
Each Input Source is defined as follows.
kick
Pad input for Trigger Input Jack 1.
kickR
Rim switch input for Trigger Input Jack 1.
snare
Pad input for Trigger Input Jack 2.
snrR1
Rim switch 1 input for Trigger Input Jack 2.
snrR2
Rim switch 2 input for Trigger Input Jack 2.
tom1
Pad input for Trigger Input Jack 3.
tom1R
Rim switch input for Trigger Input Jack 3.
tom2
Pad input for Trigger Input Jack 4.
tom2R
Rim switch input for Trigger Input Jack 4.
tom3
Pad input for Trigger Input Jack 5.
tom3R
Rim switch input for Trigger Input Jack 5.
ride
Pad input for Trigger Input Jack 6.
rideE
Edge rim switch input for Trigger Input Jack 6.
rideC
Cup switch input for Trigger Input Jack 6.
crash
Pad input for Trigger Input Jack 7.
crashE Edge rim switch input for Trigger Input Jack 7.
crashC Cup switch input for Trigger Input Jack 7.
1. Voice Parameters
q w
V=1