Drum Kit Common Parameters; Volume; Drum Reverb Send; Hi-Hat Sensitivity - Yamaha DTXPRESS II Manual De Instrucciones

5. Drum Kit Common Parameters

This function sets the common settings for the entire drum kit.
The Drum Kit Common Parameters are divided into the following
5 pages.

5-1. Volume ............................................................ 23

5-2. Drum Reverb Send .......................................... 23

5-3. Hi-Hat Sensitivity ............................................. 23

5-4. Song Select ..................................................... 23

5-5. Drum Kit Name ................................................ 23

5-1. Volume

Sets the overall volume for the drum voice.
KIT Common
Volume=
q Volume
[Range] 0-127

5-2. Drum Reverb Send

Sets the overall reverb send level of the drum voice.
KIT Common
DrumRevSend
q DrumRevSend (Drum Reverb Send Level)
[Range] 0-127
The actual reverb send level will be determined by multiplying the
reverb send level set in [2-2. Reverb Send] (P. 19) with the value
set here.

5-3. Hi-Hat Sensitivity

Sets the foot controller sensitivity connected to HI-HAT CON-
TROL jack on the rear panel.
KIT Common
HH Sensitivty=32
q HH Sensitivty
[Range] 0-63
Larger values provide higher sensitivity.
127 q
q
40
q

5-4. Song Select

This parameter allows you to switch the main song q at the same
time the drum kit is switched.
KIT Common
SongSel=110ƒ=120
q
q Song Select (Song Number)
[Range] —, 1-127
Assign the song number to select the song for playback. The song
will not be switched if the setting is set to "---".
w q (Tempo)
[Range] —, 30-300
Assign the tempo that will be used. If "---" is set, the tempo will
not change .

5-5. Drum Kit Name

Changes the drum kit name that is currently selected for editing.
KIT Common
Kit=Acoustic Kit
q Kit (Drum Kit Name)
Procedure
1. In the display shown above, use the [SEL<]/[SEL>] but-
tons to move the cursor to the character you want to
change.
2. Use the [VALUE–]/[VALUE+] buttons to select the alpha-
bet, number or symbol.
3. Repeat steps 1 and 2 above to create the Drum Kit Name
using a maximum of 12 characters.
G The available characters to choose from are (in order):
space
!"#$%&'()*+,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}ßå
Drum Kit Voice Edit Mode
w
q
23