Sony CCMA-2DAR Manual De Instrucciones página 19

3
Tighten the C mount lock screw in the position
where the orientation of the images match to
secure the camera head.
Centering the monitor image
If the position of the image on a monitor is offset,
adjust the position using the X and Y-axes
adjustment screws.
If the image is offset horizontally, adjust the X-axis
adjustment screw using a hex wrench.
If the image is offset vertically, adjust the Y-axis
adjustment screw using a hex wrench.
X-axis adjustment screw
Y-axis adjustment screw
C mount lock screw
Operation
Adjusting the focus
Using the controller
Adjust the focus using the NEAR button and FAR
button of the controller connected to the unit.
The focus position moves within the drive range in
the corresponding direction while the NEAR
button or FAR button is pressed.
Using the focus adjustment knob
Turn the focus adjustment knob of the unit to
adjust the focus.
Adjusting the iris
Turn the iris adjustment ring of the unit to adjust
the iris.
You can set the adjustment to F2.8, F4, F5.6, or F8.
7
GB
Operation