Charging The Battery; Using The Radio; Turning The Radio On And Adjusting The Volume; Adjusting The Sound (Key Beeps) - Motorola TLKR T7 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 57

Charging the battery

You can charge the NiMH battery pack itself using the
included battery support bracket.
1. Place the battery support bracket into the charging cra-
dle.
2. Install the NiMH battery pack applying its charging
contacts to those of charging cradle. Installing the battery
pack incorrectly will prevent the battery pack from
charging.
3. Make sure that the LED illuminates. Charge the battery
pack for 16 hours.
The charge indicator LEDs will remain on as long
Note:
as the battery is left in the charger.

Using the Radio

In order to get the most out of your new radio, read this ref-
erence guide completely before attempting to operate the
unit.

Turning the Radio On and Adjusting the Volume

1. Turn the rotary knob to clockwise to turn the radio ON,
and increase the volume by turning the rotary knob.
To decrease the volume, turn the rotary knob to counter
clockwise.
2. Turn the rotary knob to the end of counterclockwise to
turn the radio OFF.

Adjusting the Sound (Key Beeps)

Your radio emits a beep each time one of the keys (except
for the PTT and
key) is pressed.
To switch this sound OFF or ON, press and hold the
while turning the radio ON.
6

Roger Beep

Roger Beep is a BEEP that is sent to notify the end of
transmission (PTT and VOX transmission). Roger Beep
can be heard through the speaker when Key Beep is on. It
is transmitted even if Key Beep is turned off. However,
Roger Beep will not be heard from the speaker.
To turn Roger Beep OFF or ON:
Press and hold the

Talking on Your Radio

To talk to others using the radio:
1. Press and hold the PTT key and speak in a clear, normal
voice about 5-8 cms away from the microphone. While
you are transmitting, the
display. To avoid cutting off the first part of your
transmission, pause slightly after pressing the PTT
button before you start talking.
2. When you have finished speaking, release the PTT key.
You can now receive incoming calls. While receiving, the
icon will appear on the display.
When you continue to transmit for 60 seconds, the
Note:
radio emits TX Time Out tone and the
The radio will stop transmitting.
key
key while turning the radio ON.
icon will appear on the
icon flashes.

Publicidad

Tabla de contenido
loading

Tabla de contenido