Thermomix®
WARNING
Injury Risk
The process of kneading dough or chopping food may
cause the Thermomix® TM6 to move or slide over the
counter. The Thermomix® TM6 could fall over and cause
injury.
• Place the base unit on a clean, solid, and flat horizontal
surface.
• Ensure that there is sufficient distance between the
appliance and the edge of the work surface.
• Never leave the Thermomix® TM6 unattended while its
running.
NOTICE
Damage Risk
If the base unit is connected to an unsuitable power
supply, it will get damaged.
• Only operate the Thermomix® TM6 with the alternating
current voltage of 110–127 V and main frequency of 50 to
60 Hz, as indicated on the plug label.
NOTICE
Damage Risk
Never place Thermomix® TM6 directly under furniture
and fittings (shelving units, wall units or similar), while
in use. Doing so may result in property damage.
• Ensure that there is sufficient clearance above and around
the Thermomix® TM6, taking into account the additional
height when using the Varoma®.
1. Always place the Thermomix® TM6 on a clean, solid and even surface so
that it cannot slip.
2. Ensure that the ventilation opening on the back of the appliance is kept
clean (free of grease splashes, etc.).
3. Remove the protective foil from the touchscreen and the locking arms.
4. Gently pull the power cord out of the Thermomix® TM6 housing and connect
the Thermomix® TM6 to the mains power supply (110–127 V).
5. Any length of power cord up to 36 inch (0.9 m) can be used. If you do not
need the whole length of the power cord, the remaining length can be kept
inside the Thermomix® TM6.
6. Do not use the Thermomix® TM6 with an extension cord.
7. Do not place the base unit on the power cord. If you do, it will not rest
evenly on the surface.
21
en