Connections; Connections To A Pioneer Dj Mixer (Sold Separately) (Audio Output And Control Connector) - Pioneer DVJ-1000 Manual De Instrucciones

Ocultar thumbs Ver también para DVJ-1000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 267

Connections

Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
1. Connections to a Pioneer DJ mixer (sold separately) (audio output and
control connector)
Using the accessory audio cable, connect the white plug to the L (left) connector, and connect the red plug to the R (right) connector.
By connecting the accessory control cord, the player can be controlled from the mixer, allowing fader start play and back cue operations.
Note that digital connections can be made only with mixers equipped with digital input connectors (models DJM-800, DJM-1000, etc.).
Use a commercially available coaxial digital cable to connect this unit's DIGITAL OUT connector to the DJ mixer's DIGITAL IN connec-
tor.
Connection example DJM-800:
PHONO
CD
L
R
DVJ-1000
B
AUDIO OUT
R
L
CONTROL
COMPOSITE
VIDEO OUT
DIGITAL
S
OUT
S
SYNC IN
PREVIEW OUT
¶ When making connections to the DJM-1000, the furnished audio cables can be used to connect one set of the CD/LINE connectors
to player A, and the other set of CD/LINE connectors to a second player B. When making digital audio connections, a commercially
available coaxial digital signal cable must be used to connect this unit's DIGITAL OUT connector to one of the DIGITAL IN connec-
tors (3 to 6) of the DJM-1000 mixer.
¶ When connecting to the DJM-600, DJM-500, or DJM-300, use the furnished audio cables to connect the CD1 connectors to player
A, and CD2 connectors to player B.
¶ When connecting to DJM-909, DJM-707 or DJM-400 use the furnished audio cables to connect the CH-1 CD connectors to player
A, and CH-2 CD connectors to player B.
¶ When connecting to DJM-3000, connect player A to CH-1 LINE 1, and player B to CH-2 LINE 3.
¶ When connecting this unit to other audio mixers, connect the unit's AUDIO OUT connectors to the mixer's LINE IN or AUX IN
connectors. (# DO NOT connect to the PHONO connectors, since it may result in distorted sound or improper playback.)
SIGNAL GND
LINE
CD
L
CONTROL
CONTROL
R
DIGITAL
DIGITAL
CD
CD
NORMAL
DJ
DIGITAL IN
Coaxial digital cable
(sold separately)
Accessory control cord
DIGITAL
OUT
Accessory
audio cable
Before Operating (Connections)
Before Operating (Connections)
DJM-800
DVJ-1000
AUDIO OUT
NORMAL
R
L
CONTROL
DJ
COMPOSITE
VIDEO OUT
S
S
SYNC IN
PREVIEW OUT
A
13
<DRB1414> En

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido