Wireless Remote Operation; Switching Remote Operation On And Off - Metz MECABLITZ 58 AF-2 digital Manual De Instrucciones

21 Wireless remote operation

Wireless remote operation is compatible with the Nikon Advanced Wireless
Lighting system. In this system, the exposure of one or more slave flash units is
controlled remotely by a master flash unit on the camera. The slave flash unit(s)
is/are triggered by wireless remote control by the secondary reflector of the
master flash unit. The light of the secondary reflector does not contribute to the
exposure of the shot in this case.
The slave flash unit is assigned to one of three possible groups (A, B or C). Each
of these groups may consist of one or more slave flash units. The flash modes
TTL or manual M can be set for each group separately on the master flash unit.
So that multiple remote systems in the same room do not interfere with one
another, there are four independent remote channels available. Master and sla-
ve flash units belonging to the same remote system must be set to the same
remote channel. The slave flash units must be able to receive the light from the
master flash unit with the integrated photo sensors.
Remote flash operation also supports second curtain synchronisation.
The secondary reflector is not supported by remote flash operation. In
remote flash mode the maximum flash range is not indicated on the flash
unit's display panel.
142

21.1 Switching remote operation on and off

• Press the Sel key repeatedly until „Select"
appears on the display.
• Use the and keys to select „Remote" from
the menu. The selected menu item will be highlighted
against a dark background.
• Press the Set key to confirm the selection of
„Remote".
• Use the and keys to select „Remote Master"
for master operation, „Remote Slave"
ve operation, or „Remote OFF" to deactivate remote
operation. The setting takes effect immediately.
• Press repeatedly to return the display to its nor-
mal reading. If the key is not pressed, the
display will switch back to normal automatically after
approximately 5 seconds.
BEEP
Select
Remote
FB
Set
Remote
Master
for sla-
Set
CH1
M
A TTL
AZoom 28
B TTL+ 1 /
F32
3
Para Sel