Publicidad
Idiomas disponibles
Idiomas disponibles
11. Mount the fan blades with provided screws and
washers.
12. Carefully lift the fan, and set the downrod / hanger
ball assembly on the hanger bracket.
13. Be sure the groove in the ball is properly
aligned with the tab on the hanger bracket.
Failure to align slot on ball with tab may result in
serious injury.
14. Connect 240V main power to the
terminal block located on the hanger bracket.
15. Connections:
- Brown
fan wire is connected to the
Live supply
- Blue
fan wire is connected to the
Neutral supply
- Green/yellow fan wire is connected to
the Earth supply
HOW TO INSTALL THE FAN
WARNING
setscrew (6)
Metal
washer (3)
3P plug
TO Motor U- Red
TO Motor V -Purple
TO Motor W - Brown
TO Light Orange
TO Light Blue
2P plug
Green/Yellow
EARTH
3
Blade
Groove
Brown
Blue
Green/yellow
Terminal Block
on Bracket
220-240 Vac SUPPLY
1P plug
(User Supplied)
Lock
washer(3)
Blade
Figure 5
Tab
Figure 6
2P plug
AC IN - L
L
AC IN - N
N
Figure 7
Publicidad
