Sulion Serie 072217 Manual De Instrucciones página 17

16. Insert the Receiver Unit into the open end
of the Hanger bracket.
17. Slide the canopy up the mounting bracket and
place the key hole slots on canopy over the 2 screws
on mounting bracket.
18. Rotate the canopy until the screw head locks
in place.
19. Tighten the 2 screws and install the other 2 screws
on mounting bracket.
20. Install the canopy ring
21. Cover the decorating down rod on top of down rod
support.
22. Install the LED light shade by turning clockwise.
(Do not overtightened)
HOW TO INSTALL THE FAN
Light kit Shade
Groove
4
Ceiling
Bracket
Receiver Unit
(Open End)
Figure 8
Figure 9
Figure 10