Adjusting The Speaker Output Levels Finely; Adjusting The Time Alignment; Using The Equalizer; Adjusting The Equalizer Curve Automatically (Auto Eq) - Pioneer AVH-4200NEX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Audio adjustments
Adjusting the speaker output
levels finely
Fine adjustments of the speaker output level can be made by
listening to audio output.
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 49
2 Touch [Speaker Level].
3 Touch [<] or [>] to select the listening position
if necessary.
The following items are available:
Off, Front-L, Front-R, Front, All.
p The default setting is "Off".
p If you change the setting for the listening position, the
output levels of all the speakers will change according to the
setting.
4 Touch [<] or [>] to adjust the speaker output
level.
p "–24" dB to "10" dB is displayed as the level to be corrected
is increased or decreased.
The following items are available:
Front Left, Front Right, Rear Left, Rear Right, Subwoofer
p If the Auto EQ measurement has been done, the result of the
Auto EQ measurement will be applied by touching [Apply
Auto EQ] (the results are also applied to some settings
simultaneously).

Adjusting the time alignment

By adjusting the distance from each speaker to the listening
position, time alignment is able to correct the time required for
sound to reach the listening position.
1 Measure the distance between the head of the
listener and each speaker unit.
2 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 49
3 Touch [Time Alignment].
4 Touch [<] or [>] to select the listening position
if necessary.
The following items are available:
Off, Front-L, Front-R, Front, All.
p The default setting is "Off".
p If you change the listening position setting, the distance
value of all the speakers will change in conjunction with the
setting.
50
5 Touch [<] or [>] to input the distance between
the selected speaker and the listening position.
The following items are available:
Front Left, Front Right, Rear Left, Rear Right, Subwoofer
p You can input the value between 0 inch and 200 inch.
p The distance can be adjusted manually only when the listen-
ing position setting is set to "Front-L" or "Front-R".
p If the Auto EQ measurement has been done, the result of the
Auto EQ measurement will be applied by touching [Apply
Auto EQ] (the results are also applied to some settings
simultaneously).
 If you touch [TA On], the time alignment is turned
off mandatorily.

Using the equalizer

Recalling equalizer curves
There are multiple equalizer curves that you can easily recall at
any time. The equalizer curves you can recall are as follows:
S.Bass, Powerful, Natural, Vocal, Flat, Custom1 and Custom2
p The default setting is "Powerful".
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 49
2 Touch [Graphic EQ].
3 Touch the equalizer curve name.
Customizing the equalizer curves
p If the preset equalizer curve other than "Custom1" or
"Custom2" is modified, the equalizer curve settings in
"Custom1" will be overwritten.
p If the equalizer curve stored in "Custom1" or "Custom2" is
modified, each stored curve will be overwritten.
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 49
2 Touch [Graphic EQ].
3 Select a curve that you want to use as the basis
of customizing.
4 Touch the frequency for which you want to
adjust the level.
p If you touch "Custom1" or "Custom2", recall the equalizer
curve currently stored in "Custom1" or "Custom2".
p If you trail a finger across the bars of multiple equalizer
bands, the equalizer curve settings will be set to the value of
the touched point on each bar.
Setting the auto-adjusted equalizer
You can set the auto-adjusted equalizer to suit the vehicle's
acoustics. To use this function, the Auto EQ measurement must
be done in advance.
 Refer to Adjusting the equalizer curve automatically (Auto EQ)
on page 50
The default setting is "Off".
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 49
2 Touch [Auto EQ&TA] to switch "On" or "Off".
Adjusting the equalizer curve
automatically (Auto EQ)
By measuring the vehicle's acoustics, the equalizer curve can be
adjusted automatically to suit the vehicle interior.
WARNING
A loud tone (noise) may be emitted from the speakers when
measuring the vehicle's acoustics. Never perform Auto EQ
measurement while driving.
CAUTION
Thoroughly check the conditions before performing Auto
EQ, as the speakers may be damaged if this is performed
under the following conditions:
— When the speakers are incorrectly connected. (For exam-
ple, when a rear speaker is connected as a subwoofer
output.)
— When a speaker is connected to a power amp delivering
output higher than the speaker's maximum input power
capability.
If a microphone for acoustical measurement (sold
separately) is not placed in an appropriate location, the
measurement tone may become loud and measurement
may take a long time, resulting in battery drainage. Be sure
to place the microphone in the specified location.
Before operating the Auto EQ
function
Perform Auto EQ in as quiet a place as possible, with the
vehicle engine and air conditioning switched off. Also, cut

Publicidad

Tabla de contenido
loading

Tabla de contenido