Step4: Connect Other Cables - Onkyo TX-8260 Manual De Instrucciones

> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others

Step4: Connect Other Cables

1. Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy Network Functions such as
internet radio by connecting to the network. If you connect
AM
by wired LAN, connect to the router with an Ethernet cable
to the ETHERNET port as shown in the illustration. To
connect by Wi-Fi, after selecting "Wi-Fi" in Initial Setup
(P13), select the desired setting method to configure the
connection.
a
2. Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the FM Indoor antenna to a wall.
d
FM
FM Indoor antenna
Power Cord Hookup
The power cord must be connected only after all other
c
connections are completed.
b
2
a AM indoor antenna, b FM indoor antenna, c Ethernet Cable, d Power cord
12