Setting The Tv Display; Selecting The Color System (U.K. And Europe Models Only) - Yamaha DVX-S301 Manual De Instrucciones

Setting the TV display

Set the aspect ratio of the DVD receiver according to the
TV you have connected. The format you select must be
available on the disc. If it is not, the TV display setting
will not affect the picture during playback.
1 In DVD/CD mode, press SET UP.
2 Press repeatedly to select [VIDEO SETUP PAGE].
3 Press to highlight [TV DISPLAY], then
/
press .
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
4 Press to highlight one of the options below:
/
4:3 PAN SCAN – Select this if you have a
conventional TV and want both sides of the picture to
be trimmed or formatted to fit your TV screen.
4:3 LETTER BOX – Select this if you have a
conventional TV. In this case, a wide picture with
black bands on the upper and lower portions of the TV
screen will be displayed.
16:9 – Select this if you have a wide-screen TV.
5 Select a setting and press ENTER (OK).
Selecting the color system
(U.K. and Europe models only)
This setting allows you to toggle the video signal output
between YUV (Y P or S-Video connections) and
P
B R
RGB (AV MONITOR OUT connections).
Note
AV MONITOR OUT (SCART ) connections are only
available for U.K and Europe models.
1 In DVD/CD mode, press SET UP.
2 Press repeatedly to select [VIDEO SETUP PAGE].
3 Press / to highlight [COMPONENT], then
press .
4:3 PAN SCAN
4:3 LETTER BOX
16:9
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
4 Press / to highlight one of the options below:
YUV – Select this for Y P
connections.
RGB – Select this for AV MONITOR OUT
connections.
5 Select a setting and press ENTER (OK).
6 To return to the previous menu, press
To exit the menu, press SET UP.
GETTING STARTED
YUV
RGB
or S-Video
P
B R
.
25
3